Maximum Ratio Combining (MRC) architecture simulation

In the previous post on Single Input Multiple Output (SIMO) models for receive diversity, various receiver diversity techniques were outlined. One of them is maximum ratio combining, the focus of the topic here. Channel model Assuming flat slow fading channel, the received signal model is given by where, is the channel impulse response, is the … Read more

Selection Combining – architecture simulation

In the previous post on Single Input Multiple Output (SIMO) models for receive diversity, various receiver diversity techniques were outlined. One of them is selection combining, the focus of the topic here. Channel model Assuming flat slow fading channel, the received signal model is given by where, is the channel impulse response, is the received … Read more

Receive diversity schemes – channel models

SIMO channel configuration is characterized by 1 transmit antenna and multiple receiver antennas (Figure 1). SIMO configuration is used to provide receive diversity, where the same informationĀ is received across independent fading channels to combat fading. When multiple copies of the same data are received across independently fading channels, the amount of fade suffered by each … Read more

Model and characterize MIMO channels

Two flavors of MIMO implementation – spatial multiplexing and spatial diversity – were discussed in the previous article. In that, it was mentioned that the reliability of a MIMO system is governed by diversity and the capacity of the link is governed by degrees of freedom. Channel State Information (CSI) Multiple data streams can be … Read more

Diversity techniques and spatial multiplexing

The wireless communication environment is very hostile. The signal transmitted over a wireless communication link is susceptible to fading (severe fluctuations in signal level), co-channel interference, dispersion effects in time and frequency, path loss effect, etc. On top of these woes, the limited availability of bandwidth posses a significant challenge to a designer in designing … Read more

Introduction to Multiple Antenna Systems

Regarded as a breakthrough in wireless communication system design, multiple antenna systems fuel the ever increasing data rate requirements of advanced technologies like UMTS, LTE, WLAN etc. Multiple antenna systems come in different flavors and are generally referred as Multiple Input Multiple Output systems (MIMO). In a series of articles, I intend to cover various … Read more